GOULDS PUMP Model IC & ICO || Chemical Process Pumps

Specifications

•  34 hydraulic sizes
•  Flows up to 450 m3/h (1980 GPM)
•  Heads up to160m (514 feet)
•  Temperatures from -40°C to 280° C (-40°F to 530°F)
•  Pressures up to 25 Bar (360 PSI)

Design Features

• Full ISO 5199\EN 25199 Compliance
• Patented Cyclone Seal Chamber for Extended Seal Life
• Heavy Duty Bearing Frame, with Large Oil Sump Extends Bearing Life
• Enclosed Impeller with Optional Wear Ring for Renewable Efficiency
• Optional PumpSmart® Variable Frequency Drive For Optimized Performance and Extended Reliability
  
  Ease of Maintenance
• Modular Design For Maximum Interchangeability Between All 18 Pump Sizes
• Back Pull-Out Design Makes Maintenance Activities Safe and Simple
• Complies With ISO 2858\EN 22858 For Retrofit Capability

Patented Cyclone Seal Chamber Eliminates Seal Failures

• A tapered bore design enhanced with two cast helical grooves removes suspended solids away from mechanical seal components resulting in extended seal life.
• Increased radial clearance and increased volume improves cooling for extended seal life.
• Self-venting design eliminates vapor build up in the seal area.
• Patented design by ITT Industries, tested and proven to extend seal life.

Large Capacity Bearing Frame Extends Pump Bearing Life

• Large capacity oil sump results in cooler, cleaner oil. Model IC ISO Chemical Pump has one of the largest oil sump in its class!
• Heavy duty bearing sized for minimum L 10 bearing life of 17,500 hours.
• Rigid, stainless steel shaft resists corrosion while maintaining shaft deflections below 0,05mm.
• Double lip oil seals maintain clean oil sump.

IC – PumpSmart® Pumping Packages

PumpSmart® Pumping Packages – Complete Process Pumping Solutions!

PumpSmart is an optional patented variable speed controller with an integral microprocessor programmed exclusively for centrifugal pump operation. Because of this single purpose programming PumpSmart does more than change speed rather it optimizes pump performance with system demand while at the same time preventing operation under unfavorable conditions such as dry running, cavitation, dead heading and “run out” operation.

• Optimizes pump performance to match system demand for 30 – 50% energy savings.
• Eliminates control valves and bypass lines for reduced installation cost.
• Facilitates increased pump standardization resulting in reduced maintenance cost and MRO inventories.
• One touch programming simplifies installation.

Shaft Sealing Solutions

Innovative Shaft Sealing Solutions, Engineered To Extend Seal Life
Essential to extending seal life is providing the optimum operating environment for a mechanical seal, an environment which provides adequate lubrication and cooling of the seal faces and one which is free of contaminants such as solids and vapors.

The patented “Cyclone” Seal Chamber has been engineered to meet these requirements making it the ideal solution for most sealing applications. Patented “Cyclone” Seal Chamber – How it Works

The casted helical grooves act as barriers, collecting inbound solid particles as they travel along the angled walls of the seal chamber.

Once caught in the grooves, the rotational velocity of the liquid within the seal chamber acts to rotate these solid along the helical path of the grooves until they are transported out of the seal chamber environment.

 

Maximum Shaft Sealing Flexibility

Seal chamber cavities for the Model IC pump are in accordance with ISO 3069 and will accommodate all seal design in accordance with EN12756 L1K (DIN 24960 L1K ). Seal arrangements possible include DIN 24960 L1K single, single with quench, double back-to-back and double in tandem. Also possible is the use of cartridge seal designs.

Also available is a proprietary mechanical seal designed for optimum performance when installed in the Model IC cyclone seal chambers. The seal features a stationary spring design with balanced seal faces which has been integrated into the pump design for extended reliability and reduced cost.

Sealless Solution

Not all process pump applications ISO can be sealed with optimum reliability. Goulds dimensional magnetic drive sealless process pumps are perfect solutions to mechanical seal or environmental sealing problems. The ICM metal magnetic drive process pump has a revolutionary bearing cartridge design for maximum reliability and ease of maintenance.

Applications

• Chemical Process
• Pharmaceutical and Petrochemical Industry
• Food Technology
• Pulp preparation
• Metal Processing
• General industry
• Nuclear Power Plants
• Waste Disposal/Recycling Industries
• Water Treatment
• OEM